Universal Chilling Systems, LLC.
13
Manual
Model 10
Air Cooled Chiller
4.
User’s Set
In user’s main face, press SET entering user’s set face, the show as below:
SET T.OUT: 5º C
SET Mode: COOLING
The set face includes:
Set T. OUT: 5 °C (shows T. OUT set when the T. OUT is to be controlled.)
Set mode: cool
On/Off: M. (M/week timing/timing once)
TIMING SET
Use set
Only 2 will be shown, other contents can be inquired by
and
.
Select one of the 4 items,
change it by <+> , <->, the change will go into effect immediately. The change will be kept after power
off. It will return to main face in this face more than 30 S without touch. After the change, press
RETURN to come back to main face.
M/week timing/time once: M means the automatic on and off is stopped; week time means to start
or stop on set time on the set week day. Time once means to start or stop on set time each day in the
set period. If the clock is set as 0, it means no timing in the period. If the timing once is selected, when
the set date is expired, press SET, the present date will set automatically. When select the week
timing and timing once at the same time, the priority will be to the timing once.
i)
The TIMING SET
In the user's page, select TIMING SET by
and
,
press OK to enter TIMING SET.
a)
If the ON/OFF is set to M, the TIMING SET will not be available.
b)
If the ON/OFF is set to WEEK TIMING, it shows below:
WEEK TIMING SET
DATE TIMING SET
c) If the Timing is set to timing once, it shows below:
DATE TIMING SET
CLOCK TIMING SET
In the B face, select WEEK TIMING by
and
,
to set WEEK TIMING, press OK, then
show will below:
SUN.
> MON.
