This barrier operator is not for pedestrians!
Automatic gate openers are designed for vehicular traffic. They are powerful and can cause
serious bodily injury or death. Accordingly direct all pedestrian traffic to a separate walk-
through gate.
Cut off the power supply before starting installation, operation or maintenance.
The barrier operator must be secured to the ground.
As for the electric cable type and section, we suggest to use the cable type of with a minimum section
of 2.0mm2
Do not change the original inside wiring.
If there is power failure, please switch off the power supply first, then open the door and rotate the
handle on the motor to manually open the boom completely.
Keep the automatic control (push-button, remote control, etc.) out of the reach of children. The control
system must be installed a minimum height of 1.5m from the ground surface.
Use transmitters or button only where you can see the gate clearly.
Never open the door or the cover of the cabinet when the machine is running.
Do not permit children to play on or around the gate.
Technical Specifications
DC Series - UTC-3306
Power Supply:
120V 60Hz
Motor’s Power:
80W / 24V DC
Motor’s Rotation:
1400r/min
Time for up/down:
2 seconds (for 1-3M)
6 seconds (for 4-6M)
Max boom’s length
: 20 feet
