10
Adjustable pulp strainer
Non-slip base
Product dimensions (W x D x H): 18X23.5X21CM
3.
OPERATING THE APPLIANCE
3.1
Assembly
You must first fit the pitcher and turn it clockwise until it locks into place.
Then insert the filter, making sure that it fits snugly.
Then insert the cone to be used. If you want to use the large cone you must do it
together with the small cone, it cannot be used by itself.
When finished, remove the cone and filter. To remove the pitcher, turn it
counterclockwise and pull it up.
3.2
Operating instructions
Unwind the cable from the bottom slot and connect it to the power. Remove the lid
1.
and the unit is ready for operation.
Prepare your fruit by cutting it in half.
2.
Remove the storage lid from the citrus juicer.
3.
Place the cut side of the fruit down over the cone, press the fruit down to begin the
4.
squeezing action, using moderate but firm pressure.
TIP: The cone changes direction each time the fruit is released from the cone. This
ensures that every last drop of juice can be enjoyed.
TIP: Do not operate the citrus juicer for more than 2 minutes at a time.
The engine stops automatically when the fruit is removed from the cone or if the
5.
pressure is completely released.
With this product you can adjust the filter according to the pulp of the fruit,
6.
indicating the largest fully open filter icon and the smallest fully closed filter.
Once finished, disconnect the power cord, remove the detachable parts from the
7.
base and clean them before storing. Do not submerge all parts together or part of
the body in water.
4.
MAINTENANCE AND CLEANING
IMPORTANT:
Before cleaning the appliance, unplug it and let it cool down. Do not
clean with abrasive materials or steel pads.
