21
Using (2)ST3*6 fix the discharge collar into the air outlet
adapter.
Attach an adequate length of 150mm round duct to the air
outlet adapter.
Carefully place the decorative chimney bottom into the
recessed area of the hood body top and using (2) ST2.9X14
screws and (2)
∅
7×27mm dry wall anchors to fix it.
Carefully slide the decorative chimney top down inside the
decorative chimney bottom. Use (2) M4X6 screws on both
side of chimney top to fix it on the chimney holder.
To avoid hood body move, using (2) ST4.2x3 screws and (2)
dry wall anchors
∅
10×45mm to fix hood inside.
Summary of Contents for UBCA2001-20
Page 28: ...28 www universalblue es ...