Universe Future Technology Co.,LTD
12
Introduction of Gateway
Step-2：Click“设备管理”
（figure 6.9-1）
Step-3：Click“添加设备”
（then Inclusion/Exclusion LED turn green and blink until success or timeout for
fail）
Step-4：Trigger device to send NIF
（the way to send NIF is different because the device design is different.If
gateway received NIF,the Inclusion/Exclusion LED will turn off）
Figure 6.9-1
Method 2
Step：
Step-1：double click slowly Inclusion/Exclusion button
（then Inclusion/Exclusion LED will turn green and blink until success or timeout
for fail）
Step-2：Trigger device to send NIF
（the way to send NIF is different because the device design is different.If
gateway received NIF,the Inclusion/Exclusion LED will turn off）
NOTE：
* SHOULD do Exclusion first before Inclusion,in order to clear the old data in
device
* the distance of two device should be less then 2m when doing Inclusion
* some device can be operated immediately,for example switch,some device need to
do configuration before it can work normally,for example sensor,please refer
to the introduction of device
6.10 Exclusion
Exclusion
Function：delete a device from network,or clear the old data in the device which
have been inclusion into other network
Method 1
Step：
