INSTRUCTION MANUAL
INTRODUCTION
The Univex model 1404, 1405 and 1406 Patty Presses are designed to press
hamburger meat into patties. The 1404 Patty Press produces a 4 inch diameter patty,
the 1405 Patty Press produces a 5 inch diameter patty and the 1406 Patty Press
produces a 6 inch diameter patty.
The Univex Patty Press can be used to form patties of food products other than
hamburger such as: crab cakes, fish cakes and vegetable burgers.
The thickness of the patties produced is determined by the amount of hamburger or
other food products placed in the press.
This manual contains instructions for the inspection, safe operation, care and
maintenance of the Patty Press.
INSPECTION
The 1404, 1405 and 1406 Patty Press is inspected and tested at the factory. The
person opening the shipping carton should re-inspect the Patty Press immediately
upon receipt for loose, damaged or missing parts. Any damages should be reported to
the carrier immediately and any shortages of parts should be reported to your dealer or
directly to Univex Corporation Customer Service Department.
Page 1
