6
Remarks
Check the following before using POS
1) The required peripheral(s) has (have) been connected to the correct interface
connector(s);
2) The power plug is connected to AC outlet.
Attention for the handling of Touch Panel
The surface of touch panel is made from PET sheet with hard coat treatment. In order not to
damage the touch panel, please kindly note the following points:
1) Always press touch panel by a finger. Never use hard objects (hard and sharp objects
such as ball-point pen are even worse).
Note!
If you use hard/sharp objects or hit strongly, the touch panel coating is removed
and Touch Panel will not recognize the correct position.
2) When
cleaning
- Do not use hard cloth. Do not wipe hard.
- Use a) dry soft cloth, b) soft cloth with neutral detergent after wring dry or c) soft
cloth moistened with Ethanol, and wipe gently.
- Do not wipe Touch Panel hard even if the protection sheet is attached on it.
- Do not use sharp objects wrapped with cloth.
- Do not use thinner, benzene, volatile chemicals, acidic/alkaline solution. The
surface may be damaged.
3) When a foreign material is caught in the gap between Touch Panel and Cabinet
Please remove it, but do not use sharp objects such as ball-point pen, especially at the
edges.
Note!
If a material is left caught, Touch Panel will consider that the position is always
pressed.
