27
e) Square Entry (Measurement Calculation)
Square entry can be done by using
X2
and
X1
keys as shown in the sequence below;
enter the ratio to standard width ---
X2
--- enter the ratio to standard length ---
X1
WRAPPING PAPER : 1.00 for width 1 meter and length 1 meter
When the WRAPPING PAPER with a measurement of 1.5 m (W) x 1 m (L) is sold
KEY ENTRY
DISPLAY
RECEIPT
1.5 [X2] 1 [X1]
WRAPPING PAPER
1.5 X 1 X
1.500
1.5 X 1 X 1.00
WRAPPING PAPER 1.50
1.5: ratio to standard width
1 : ratio to standard length
After pressing
X2
key, a number with a decimal can not be entered for the ratio to standard length.
f) Price Shift
Every PLU can have two prices. One is used for the normal preset price and the other for happy hour price,
service price, etc.
Bar Coded PLUs:
turn to
X position,
if required
---
PRICE
SHIFT
---
scan the PLU
Hard PLUs:
turn to
X position,
if required
---
PRICE
SHIFT
---
HARD
PLU
PLU
Coded PLUs:
turn to
X position,
if required
---
PRICE
SHIFT
--- enter PLU code ---
REPEAT
Note: The 2nd PRICE lamp is lit up when
PRICE SHIFT
key is pressed.
The price shift remains for one registration, for one transaction or until pressing
PRICE SHIFT
key depending on
programming.
g) Menu Shift
The hard PLU key layout can be changed to three different preprogrammed layouts by using two menu shift
keys. Pressing the same menu shift key cancels the menu and pressing another menu shift key changes the
menu.
Hard PLUs:
turn to X position,
if required
---
MENU
SHIFT
---
turn to R position,
if required
---
HARD
PLU
Note: The 2nd MENU lamp is lit up when
MENU SHIFT 1
key is pressed.
The 3rd MENU lamp is lit up when
MENU SHIFT 2
key is pressed.
The menu shift remains for one registration, for one transaction or until the next shift key is pressed, depending on
programming.
