01 - Lid
02 - Bowl
03 - Motor Support Flange
04 - Cabinet
05 - Base
06 - Cup Flange
01
1. Introduction
1.1 Main Safety Precautions
The High Rotation Blenders Mod. TA-04 are machines simple to operate
and to clean .
To avoid accidents read the following instructions :
1.1.1
Before cleaning or maintenance unplug the machine from electric
source .
1.1.2
Never use tools not belonging to the machine to help operation .
1.1.3
Before to switch ON the machine , be sure the Bowl No.02 (Pic.01)
is stable on its position .
1.1.4
Never throw water directly on the machine .
1.1.5
Never switch ON the machine with wet clothes or wet feet .
1.1.6
Read with attention item 3.1.
1.2 Main Components
All components are made with carefully selected materials for their
function, in accordance with the Siemsen standard testing procedures and experience .
Picture - 01
06
01
02
03
05
04
08
5.1 Problems Causes and Solutions
5 Problem Analysis and Solutions
The High Rotation Blender has been designed to need a minimum
maintenance . However some problems may arise due to normal wear during the machine
life .
If some problem arises with your High Rotation Blender , check table 2 ,
where some possible solutions are recommended .
Table - 02
5.2 Electric Diagram Mod. TA-04
ON/OFF Switch
Motor
110 or 220 Volts
Problems
Causes
Solutions
* Electric shortage .
* Check if the machine
plug is into its socket ,
and if there is electric
energy on the network .
* The machine does not
Start.
* The Bowl is leaking.
* The product does
not blend
* Problem with the sealing
system
* Product to big , the
knife does not touch it .
* Knife not sharpened.
* C a l l T e c h n i c a l
Assistance
* C a l l Te c h n i c a l
Assistance
* Cut the product into
smaller pieces .
