26
2. Wipe the casing and slot for the
ice cream bowl with a damp, well-
wrung cloth.
3. Place the appliance on a dry, level
work surface.
Button
“Power”
When the plug is in the power socket,
the appliance is in the stand-by-mode.
Press the button in order to turn on the
appliance. In order to turn off the appli-
ance during operation, press this button
as well.
Button
“Time +”
This button extends the time in 1-minu-
te-steps. When you keep pressing this
button, the time passes continuously. The maximum time for preparation is 60
minutes
Button
“Time –“
This button shortens the time in 1-minute-steps. When you keep pressing this
button, the time passes continuously. The minimum time for preparation is 5
minutes. It is not possible to set the preparation time to less than 5 minutes.
Button
“Start/Break”
This button starts the programme. It is possible to interrupt by pressing this but-
ton as well. When you interrupt the programme, the preselected time is inter-
rupted as well. As soon as you press the button START/BREAK, the appliance
will restart. Advice: If the preparation procedure does not start again within
20 minutes, the appliance will be turned off automatically. Then, you need to
press the button POWER and do all the settings again.
Please do not press the button several times. In order to avoid damages of the
compressor, you need to wait at least 5 minutes before pressing the button again.
DESCRIPTION OF BUTTONS
Time -
Start/Break
Power
Time +
MAKING ICE CREAM
1. Prepare the ingredients for the ice
cream as stated in the recipe. If
the ice cream mixture has to be
cooked, this should be done a
day in advance so the mixture has
time to cool thoroughly.
2. Refrigerate the prepared ice
cream mixture or the required
ingredients to a temperature of
6–8 °C.
Copyright UNOLD AG | www.unold.de