27
6. Plug the power cord into an
electrical outlet.
7. Switch on the appliance by setting
the switch to „On“. The mixing
blade starts to turn. You can also
press the “Off/Pulse” button, in
which case the appliance will
operate in short, powerful bursts.
Use the Pulse switch only in
intervals of five to ten seconds.
8. If ingredients stick to the inside
of the mixing bowl, switch off
the appliance, unplug it from the
power supply and then loosen the
ingredients using a spatula.
9. When the ingredients have
reached the desired consistency,
switch the appliance off by means
of the “Off/Pulse” switch and
unplug it from the power supply.
10. Wait until the mixing blade has
stopped moving.
11. Remove the lid.
12. Carefully remove the mixing blade
from the bowl.
13. Empty the ingredients from the
mixing bowl.
USING THE GRATING AND SLICING DISCS
For slicing and grating
vegetables, fruits, bread for bread
crumbs, cheese, Parmesan, herbs,
chocolate
Note that the plastic can become discolored from some foods, such as carrots.
Such discolorations can easily be removed with a little butter.
Ingredients that can melt (such as chocolate or hard cheese) should be processed
for only a short time, to prevent them from becoming too warm.
Do not operate the appliance longer than one minute at a time. After one minute,
let the appliance cool briefly before continuing.
1. Read the information in the
chapter on “Using the chopping
blade”.
2. Carefully attach the desired disc
on the disc holder. Insert the disc
from above into the opening in
the disc holder. Make sure that
the flat side of the disc matches
the flat side of the opening. Only
then can the disc lock into place.
Do not continue until after che-
cking to make sure that the disc
is firmly in place.
Caution: The blades of the
discs are very sharp: Danger of
injury.
3. Now place the disc holder onto
the shaft in the mixing bowl.
4. Caution: both the shaft in the
appliance and the inside of the
utensils have a flattened side. All
utensils can be inserted only if
both flattened sides are aligned.
5. Place the lid on the appliance.
6. Switch on the appliance by setting
the switch to „On“. The mixing
Copyright UNOLD AG | www.unold.de
