Stand 25.2.2020
21 von 68
DE
EN
FR
NL
IT
ES
PL
1. Remove all packaging materials and any transport safeguards. Keep
packaging materials away from children – danger of suffocation!
2. Ensure that the appliance is standing on a suitable, level substrate, and has
been set up so that it is safe and stable.
3. Plug the mains plug into an electrical outlet.
4. Press the „ON/OFF“ button once. The appliance starts. In the basic settings
the appliance runs at Level 4.
Setting the speed
5. You can chose from seven speed levels between low and high. Press the
„+“ and „–“ buttons repeatedly until the appliance operates at the desired
speed. The current setting is shown by an appropriate number in the display.
Swing function/oscillation
6. Press the „Oscillation“ button to activate the swing
function of the base. Press the button again to stop
the appliance in the current position, the fan however
keeps running.
Position of the fan heads
7. The fan heads can be rotated in a radius of up to 180°
to the left or right. Select the position that is most
comfortable for you by carefully turning the individual
fan heads back and forth..
Tilt angle of the fan heads
8. The tilt angle can also be adjusted separately for each
fan head. Carefully push the fan head up or down until
the desired position is reached. Tilting upwards is pos-
sible to a maximum of 45°, downwards to a maximum
of 30°.
Switching individual fan heads on and off
9. Using the „Fan heads 1, 2 and 3“ buttons, you can individually select the
fan heads that should be switched on or off. Press the respective button to
switch off the fan head. Pressing the button again switches the fan head
back on.
OPERATION
Copyright UNOLD AG | www.unold.de
