6. OVENS EXHAUSTS CONNECTION
The extract outlet of the oven has to be connected to
the proper inlet that is positioned on the rear of the hood
(see the picture). The second fumes inlet of the hood, if it
not used, has to be closed with the tap supplied.
If you need to connect two ovens to the hood, the ex-
tract exhaust of both of the ovens has to be connected to
the corresponding fumes inlet of the hood.
7. FUMES
EXHAUST
The exhaust fumes of the hood are discharged from the
top of the hood through a tube of 151 mm of diameter.
ENGLISH
7
ENGLISH
UNO
X
R
6
ENGLISH
8. CONNECTION TO THE OVEN
The hood XC314 is connected to the oven through the
issued cable RJ45.
To connect the cable of the hood to the oven proceed as
follows:
remove the safety cap by unscrewing the proper
screw
Insert the connector of the cable in any one of the
three female connectors you find on the power card
(you can use any of them)
Re-assemble the safety cap by fixing the screw
Now the hood is recognized by the oven and connected
to it.
In case there are two ovens to be connected to the hood,
you can choose any of the ovens to connect directly to
the hood.
•
•
•
Summary of Contents for ChefTop XC314
