Scales - Models 410 and 520
— Safety
1-3
Following Safety Instructions
•
Read and understand this operator’s manual before operating.
• All machinery should be operated only by trained and authorized personnel.
• To prevent machine damage, use only attachments and service parts approved by the manu
-
facturer.
• Always shut towing vehicle engine off and remove key before servicing the
implement.
• Avoid personal attire such as loose fitting clothing, shoestrings, drawstrings, pants cuffs, long
hair, etc., that may become entangled in moving parts.
• Never attempt to operate implement unless you are in the driver’s seat.
• Never enter a cart containing grain. Flowing grain traps and suffocates victims in seconds.
Before Servicing
• Avoid working under an implement; however, if it becomes absolutely unavoidable,
make sure the implement is safely blocked.
• To prevent personal injury or death, always ensure that there are people who remain outside
the cart to assist the person working inside, and that all safe workplace practices are fol-
lowed. There is restricted mobility and limited exit paths when working inside the implement.
• Ensure that all applicable safety decals are installed and legible.
Before Operating
• Do not stand between towing vehicle and implement during hitching.
• Always make certain everyone and everything is clear of the machine before beginning opera
-
tion.
• Verify that all safety shields are in place and securely latched.
• Ensure that all applicable safety decals are installed and legible.