1
11
Platform calibration is the most important step for successfully printing as it ensures part adhesion on the first layer.
Ideally, the distance between the nozzle and the platform is constant, but in reality the distance varies at different
positions due to many reasons (e.g. a slightly tilted platform) and this could cause warping on prints or even a
complete print failure. Fortunately, the UP BOX has automatic platform leveling and automatic nozzle height detection
functions. By using these two functions, the calibration process can be completed quickly and easily.
In the "3D Print" menu in the UP Software, select "Auto Level" to initiate auto
leveling. The leveling probe will be lowered and start to probe nine positions
on the platform. After probing the platform, the leveling data will be updated
and stored in the machine. The leveling probe retracts automatically.
Nozzle height detection will be started automatically after the end of auto
leveling. The print head will move toward the nozzle height detector and the
nozzle will eventually touch and press the thin metal sheet on the device to
make the meausrement.
Calibration Tips:
1. Perform calibrations when the nozzle is not heated.
2. Remove residual plastic on the nozzle before calibrating.
3. A print board should be fitted on the platform during calibration.
4. Autoleveling and nozzle height detection can only be initiated when nozzle temperature is under 80 °C.
Automatic Platform Calibration
Auto leveling probe
retracted
Auto leveling probe
retracted
Nozzle Height
Dectector.
Summary of Contents for BOX pp3dp
Page 1: ...1 USER MANUAL FOR UP BOX ...
Page 37: ...37 ...