1
14
Prepare for Printing
Make sure printer switched on and
connected to computer. Select Main
Menu - 3D Print - Maintainance.
Click New Spool and choose ABS and
input the filament weight.
Click "Extrude." The print head will
start to heat up, within five minutes. Its
temperature will reach 260°C, then the
printer will buzz and the print head will
start to extrude.
Gently insert the filament into the small
hole on the print head. The filament will be
fed into the print head automatically when
it reaches the extruder gear inside the
print head.
Check the nozzle for plastic extrusion. If
plastic is coming out from the nozzle, that
means the filament is loading correctly
and the printer is ready for printing. (The
extrusion will stop automatically.)
1
2
3
4
5
Summary of Contents for BOX pp3dp
Page 1: ...1 USER MANUAL FOR UP BOX ...
Page 37: ...37 ...