background image

SAFETY AND WARNINGS

WARNING:

 

Designed for use in dry work environments only. Risk of fire, electric shock, or personal in

-

jury if used outdoors or in a damp location. Use only indoors.

WARNING: 

To reduce the risk of burns, fire or electric shock, hard wiring of power infeed cables must 

be performed by a licensed electrician only in accordance with the NEC and local codes. All connections 
must be properly grounded.

WARNING:

 

Do not open any component or insert any object in a component. Risk of electric shock.

WARNING:

 

Never operate this product if there is visible damage to the cables or connections, if it is not 

working properly, or if any part of it has been exposed to water or other liquids.

WARNING: 

Use this system only as described in these instructions and do not use with any components 

not recommended by the manufacturer.

Please read this manual carefully. Inappropriate use can cause property damage or bodily injury. Under no cir-

cumstances does the manufacturer accept warranty or liability claims for damages caused from improper use or 
handling. Provide this manual to any new user.  

Summary of Contents for Power Pole









Reviews: