12
RECEIVER SETUP
Setting the receiver
Lift the battery door located at the back of the receiver and insert 3 AA batteries
according to the indicated polarity, then close the battery compartment.
The WS2635 is designed to automatically synchronize it’s calendar and clock
once it is brought within the reception range of a WWVB radio signal. The receiver
will display the outdoor temperature and humidity data transmitted from the sensor.
The receiver will also display the data collected from the wind and the rain gauge
sensors.
LOW BATTERY INDICATION: If the batteries of the receiver are low, the
following indicator will be displayed on the screen of the receiver below
the inside temperature. When the receiver’s LCD display becomes dim that is
also an indication that the batteries are low and need to be changed.