14
Receiver installation (WS2635)
The receiver has an adjustable stand and a wall mount hole. To attach receiver
to the stand, simply click stand ball into the hole at the bottom of the receiver.
The receiver can then be placed onto any flat stable surface. To ensure reliable
signal transmission, the receiver should not be installed near a dense wall,
electronic devices or a large metal surface. To mount the receiver on a wall,
use a nail or hook to hang the unit.
Temperature/Humidity transmitter installation (WT440H)
The WT440H sensor has a detachable back cover, with both a wall mount hole
and an easel stand. To mount the remote sensor on a wall, use a nail or hook.
To place the remote sensor on a window sill or flat outdoor surface, tilt back the
easel stand and ensure the unit is stable.
Since the transmission range between the receiver and transmitter, can be
affected by the dense walls or electronic interference, place them as close
together as possible. Also, before choosing a final location for the remote
temperature sensor(s), test that the receiver is consistently displaying
readings from the transmitter(s).
Although remote temperature transmitters are weather resistant, it is highly
recommended to place them away from direct sunlight, rain or snow. An ideal
location would be on a window sill or under a deck. This will prevent weather
damage to the unit and maintain more accurate readings.
INSTALLATION