WEATHER FORECASTING
REMARKS:
* The temperature/humidity transmitter should be placed outdoors on channel 1,
since this is the default weather forecasting channel. The data from channel 1
is responsible for determining which weather forecast icons display on the
receiver's LCD screen (as well as the temperature and humidity trends).
* After installation is completed, allow 12-24 hours for the weather station to
operate at a steady state, as this will ensure a more accurate forecast.
* Common to weather forecasting, absolute accuracy cannot be guaranteed.
* If the temperature/humidity transmitter is moved from one location to
another, which is significantly different, or higher or lower, than its original
position (e.g from the ground floor to 1st floor of a house), remove the batteries
and then reinsert them after 30 seconds. Then re-synchronize the
temperature/humidity transmitter with the receiver. (see synchronization section)
A change in location may alter the transmitter's local temperature or humidity
readings.
* Ensure that the temperature/humidity transmitter is placed well away from
direct rain, direct sunlight, any sources of heat, or areas of your home with less
insulation, (such as ventilation outputs or single pane windows) because the
temperature/humidity may be affected by heat or humidity escaping from
your home.
30