4 l Uponor Comfort Port EU l Technical Information
EN
1.3 Advantages
Up to 2.5 hours of installation and set-up time
savings through prefabrication
The conventional assembly of individual components on the
construction site requires time, which is often insufficient in hectic
construction site operation. Especially not if you only realize on site
that urgently needed components are missing.
The better, if you can save valuable working time by installing pre-
fabricated modules. In the Uponor Comfort Ports, therefore, all the
components required for the hydraulic connection and for connection
to the room temperature control of a Uponor underfloor heating
system are already integrated in the stable distribution box ready for
connection. Depending on the configuration, even completely wired
pump groups for connection to a heat generator without own flow
temperature control are factory-installed in the Uponor Comfort Ports.
Avoid assembly errors on the construction site
Nobody is perfect. Just under time pressure happen on a construction
site sometimes errors. Factory assembly and wiring of the control
components in the Uponor Comfort Ports virtually eliminates the
likelihood of something going wrong on the job site. All actuators are
assigned to the respective heating zones, labeled and placed on the
control terminal block. A factory pre-setting of the hydraulic balancing
as well as the function test of the actuators ensure the defect-free
assembly progress. For the electrical connection, only one power
supply cable must be connected to the factory-integrated safety
socket.
And for the vertical installation of Comfort Ports, not even a spirit level
is necessary, because it is already integrated in the ports.
You configure online
– we assemble and deliver
Possible system constellations are so diverse that Uponor Comfort
Ports are not produced off the shelf but exactly according to customer
specifications. Configuration is easy on the PC with the Uponor
Comfort Port Online Configurator.
Based on the entered basic conditions and desired functions, the
Comfort Port, which is needed for the respective construction project,
is put together. The convenient query and order process ensures
that no configuration parameters are forgotten. The delivery of the
preassembled Uponor Comfort Ports is then carried out with the
appropriate assignment marking in protective packaging suitable for
the construction site, if desired directly to the construction site.
