16 l Uponor Combi Port BASE XU l Installation manual
A CW from riser
B
DHW to apartment
C
Primary heating supply
D Primary heating return
E
Secondary heating supply
F
Secondary heating return
1
Plate heat exchanger
4
Sensor pocket HM M10x1
5
Flushing valve
6
Air vent
7
Heat meter distance piece
9
Strainer
13
DHW temperature controller (TWB)
18
Union nut ¾“
19
Pump
26
Water shock absorber
27
'\QDPLFÀRZFRQWUROOHU
33
Safety valve
35
Pressure gauge
38
Membrane expansion vessel
40
Thermostatic heating limiter
4.2
Hydraulic scheme
Equipment
4.3
Electrical connection
7KHYDOLGVWDQGDUGVDQGFRXQWU\VSHFL¿FUHJXODWLRQVPXVWEH
observed for the electrical wiring (e. g. DIN VDE 0100-540).
Please connect the station as follow:
1
Connect Combi Port XU electrically (see wiring diagram)
2
Connect individual room controller: please follow to the
corresponding instruction Smatrix or Flexiboard
3
Coding of actuator: please follow to the corresponding instruction
Smatrix or Flexiboard.
4 Establish equipotential bonding by using a copper equipotential
bonding conductor (cross-section at least 6 mm
2
). Connect the
earthling clamp to a suitable equipotential bonding rail in the
building.
Warning!
Danger to life due to electric current!
Contact with live parts may cause fatalities.
Disconnect the distribution station from the power supply
and secure it against being switched back on.
Test for absence of voltage.
The pump may only be connected by a qualified
electricain.
HIU
Plate heat exchanger
15 l/min.
domestic water
(GBS-240-14E)
heating
(GBS-220-16E)
21 l/min.
domestic water
(GBS-240-20E)
heating
(GBS-220-16E)
27 l/min.
domestic water
(GBS-240-30E)
heating
(GBS-220-16E)
A
B
C
D
F
T
5
AG
T
