Uponor Smatrix Wave PLUS U@home R-167 – U@home web access l 25
After this, you will have to enter the new device credentials
and a description. If you are unable find this, please see the
section “Create a user account account”.
Apply modifications to the installation
Add extra installations
U@home module replacement
All changes made to the installation (add/remove rooms,
sensors, etc.) are automatically recognized by the system
and updated to the web interface.
Several buildings can be controlled from your user account.
This can easily be done by clicking on “Add new U@home
module”.
In certain situations you may need to replace the devices
controlled from your user account:
• You need to replace the U@home module of your
installation with a new one.
• You are moving to a new house, so you need to release
the old device and add the one in your new home.
The first step is to add the new device following the steps in
the previous section “Add extra installations”.
Next, the old device is removed by clicking on “Show extra
options” and “Remove installation”. Confirm. Note that the
new owner cannot add the device to his/her account until the
previous owner has completed this step.
