Uponor Smatrix Wave PLUS U@home R-167 – Smartphone/tablet apps l 29
1
Link to “help” pages. Tap here if you need help.
2
System settings. Tap here to set general configuration.
3
Alarm indication. This icon is only shown if there are any alarms active
in the system. Tap here to see the list of alarms in the system.
4
Outdoor temperature and weather information. If you have allowed
access to location during initial setup, weather information is supplied
by the weather service of your operating system. In case you have an
outdoor sensor installed, the measured value is shown here.
5
Indoor temperature. Average temperature for all rooms in the house.
6
Heating/cooling mode indication:
Heating
mode
Cooling
mode
7
“Home/away”
mode:
hold and drag the man into the house (“Home” mode) while you are at
home. This ensures comfortable temperatures: warmer in winter and
cooler in summer. If you plan to go on holiday or spend some days
away from home, hold and drag the man out of the house (“Away”
mode). In this way, your house temperatures will be set to energy-
saving mode.
Please check with your supplier for how to best save energy in “Away”
mode. The number of days and “ECO” settings depend on the
installation.
8
The dots indicate the number of screens available and which screen is
the current one.
9
Shortcut to room list.
The iPad/tablet version provides different views. If you place
it in horizontal position, you will see the home screen and
two rooms. If you rotate the iPad or tablet and place it in
vertical position, the view is the same as for smartphones
(shown above).
Swipe the different screens to reach the room you would like
to monitor or control.
U@home home page
Basic use of apps; “Home” and “Away” modes
1
9
3
4
5
6
8
7
2
