Figure 8.13
5.
For a dual-fuel engine:
Set the FUEL switch
to gasoline
or LP
gas
, depending on which you want to use
(see Figure 8.13).
6. Enter the platform and close the gate.
Figure 8.14
7. Turn the
Emergency Stop
switch
clockwise and it will pop out (on) (see Figure
8.14).
8. If the engine is cold, press and hold the
Choke
switch
~
(see Figure 8.14) during
the next step.
9. Turn and hold the
Start
switch
clockwise (to the start position) until the
engine starts or for 20 seconds, whichever
comes first. When the engine starts, release
both the start switch
and the choke
switch
~
(see Figure 8.14).
If the engine does not start in 20 seconds,
release the start switch
and release the
Choke switch
~
then wait 60 seconds
before trying to start the engine again.
➜
Starting a diesel engine
To start a die sel en gine from the plat form con trol
box do the fol low ing:
Figure 8.15
1. Set the
Battery
switch
to on (see Figure
8.15).
Figure 8.16
2. Set the
Emergency Stop
switch
to on
(up) (see Figure 8.16).
3. Set the
Ground/Platform Selector
switch
to platform (up) (see Figure 8.16).
4. Turn the key
(see Figure 8.16) to on do
not turn the key
to start.
SR3370 & SR2770 – 13184A
Rev A
page 8 - 5
8. Operation
CAUTION
