Introduction
The most im por tant chap ter in this man ual is the
safety chap ter - Chap ter 1. Take time, now, to study
it closely.
The in for ma tion in Chap ter 1, might save your life,
pre vent se ri ous in jury, or dam age to prop erty or the
X33RT / X27RT
.
This in tro duc tion also con tains im por tant in for ma -
tion con cern ing the re spon si bil i ties of the owner of
the ma chine.
■
Standard
X33RT / X27RT
Version 2
The stan dard
X33RT / X27RT
in cludes the fol -
low ing fea tures:
●
Fully proportional one handed joy stick
control
●
Reliable diesel engine
●
Large 1200mm multi position extension deck
●
35% gradeability
●
4 wheel drive
●
Hour meter
●
Temperature & ammeter gauges
●
Easy access side trays for engine &
hydraulics
●
Lockable hinged covers
●
Independently operated hydraulic stabilisers
with auto level
●
Swinging gate
●
Independent articulating rear axles
●
Forklift pockets
●
Lifting lugs and tie down rings
●
Flashing light
■
Options
The fol low ing op tions are avail able for the
X33RT
/
X27RT
:
●
No stabilisers
●
Non-marking tyres
●
110/240V power to platform
●
RCD/ELCB Outlet
●
Alternative power options
❍
Gasoline engine
❍
LPG engine
❍
Combination LPG/Gasoline engine
❍
Bi-Energy 24V DC / Diesel engine
■
Operation Manual
This man
ual pro
vides in
for
ma
tion for safe and
proper op er a tion of the ae rial plat form. Read and
un der stand the in for ma tion in this Op er a tor’s man -
ual be fore op er at ing this ma chine on a job site.
Ad di tional cop ies of this man ual may be or dered
from Snor kel. Sup ply the model and man ual part
num ber from the front cover to as sure that the cor -
rect man ual will be supplied.
All in for ma tion in this man ual is based on the lat est
prod uct in for ma tion at the time of pub li ca tion. Snor -
kel re serves the right to make prod uct changes at
any time with out obligation.
■
Photographs
Pho to graphs are taken to rep re sent the ma chine
and its com po nent parts as clearly as pos si ble.
How ever, there may be mi nor dif fer ences be tween
the pho to graphs and your ma chine. This rep re -
sents in di vid ual cus tomer pref er ences and Snor -
k e l ' s o n - g o
i n g c o m m i t t m e n t t o p r o d
u c t
de vel op ment.
■
Safety Alerts
A safety alert sym bol is used through out this man -
ual to in di cate dan ger, warn ing and cau tion in struc -
tions. Fol
low these in
struc
tions to re
duce the
like li hood of per sonal in jury, prop erty dam age or
dam age to the machine.
The terms dan ger, warn ing, and cau tion in di cate
vary ing de grees of per sonal in jury or prop erty dam -
age that can re sult if the in struc tion is not followed.
Denotes an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
Denotes a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
Denotes a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
It may also be used to alert against unsafe
practices or action which may result in
damage to the
RT
.
Denotes important information pertaining to
settings, capacities, conditions, which
could, if ignored lead to machine damage or
future hazardous situations.
SR3370 & SR2770 – 13184A
Rev A
page - iii
DANGER
WARNING
CAUTION
IMPORTANT
