8
©
All rights reserved. All trademarks are property of their respective owners.
6.
Maintenance
Please read the following instruction to ensure your safety and maintain a longer
product lifetime. This section contains detailed information about moving, maintaining,
and placing the UPS. With a minimal amount of maintenance, you can expect the UPS
to function smoothly.
6.1 Transportation
Please handle UPS with extreme caution since a high amount of energy is within
the batteries. Keep the unit in position as marked on the packaging and never drop the
unit.
6.2 Storage
Please read the following instructions if the UPS is not installed immediately:
Store the equipment as is in its original packing and shipping carton.
Do not store in temperatures outside the range of +15°C to +25°C.
Protect the equipment from wet or damp areas and moist air.
To maintain the vitality of the batteries, please recharges the UPS at least 8 hours
every six months.
6.3 Operation
CAUTION:
Ensure that all environmental concerns and requirements are met according
to safety instruction; otherwise, the safety of installation personnel cannot be
guaranteed since the unit may malfunction.
Please ensure no flammable substances such as gases or fumes.
Avoid extreme temperature and humidity. Protect the equipment from moisture.
Ensure there is enough space (300mm or above recommended) at the rear and
side of UPS for proper ventilation.
Ensure that the front of the UPS remains clear for user operation.
Only
authorized agents or technicians may service the unit.
Do not
open the UPS cabinet. Components may contain hazardous or fatal
voltage.
Output receptacles may carry live voltage without connecting to the main power.
Pay special attention to UPS air inlet;
do not
let it coved by dust.
6.4 Battery
6.4.1
Maintenance
The reliability of the battery is heavily related to the environmental issue.
At the temperature of 25 degrees Celsius, A regular 6-12 months’ checkup is advised.
6.4.2
Replacement
Please contact for technical assistance.
1.
Ensure UPS is turned off and disconnected from the main power.
2.
Remove the battery cover from the bottom of UPS.
3.
Disconnect battery wire and remove the battery pack.
4.
Replace with the same type and number of battery.
5.
Reconnect the battery and reinstall the cover.
