4
4.3 Additional keys
•
The following action keys can be assigned to the additional keys:
1/2/3/4/L/R/L2/R2/D-PAD
•
Individual functions or key combinations can be programmed.
•
Your settings remain active after an interruption to the connection.
•
Programming mode is aborted after 30 seconds.
•
Programming mode is ended after 25 keys.
4.4 Programming the additional keys
•
Press and hold the respective M button and Start briefly.
•
The four LEDs will now flash alternately.
•
Now enter the individual key or key combination.
•
To finish, press the relevant M key again.
•
To delete the M keys, hold "Start" and an M key pressed.
•
Now press the M key for which you wish to delete the setting.
5. Care and maintenance
•
Only clean this product with a slightly damp, lint-free cloth and do not use
aggressive cleaning agents.
6. Turbo function
•
The following action keys can be assigned a Turbo function: 1/2/3/4/L/R/L2/R2/D-
PAD
•
To assign the relevant key, press and hold the action key and Turbo key at the same
time.
•
To remove the Turbo function, repeat the procedure.
•
Your settings will be reset after an interruption to the connection.
7. Auto function
•
The following action keys can be assigned the Auto function:
1/2/3/4/L/R/L2/R2/D-PAD
•
To assign the relevant key, press and hold the action key and then press the Turbo
key twice.
•
To remove the Auto function, repeat the procedure.
•
Your settings will be reset after an interruption to the connection.
8. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or from
failure to observe the operating instructions and/or safety notes.
Summary of Contents for VENDETTA 300
Page 3: ......
