１０
Usually, the language of the control panel is English. If Chinese is displayed, you can
change the language in the upper right corner of control panel. Please select ‘‘
英文
’’.
Now the video encoder can be used in local area network(LAN). In order to use it in a wide
area network(WAN), we need to change the IP address of video encoder.
Step 10.
Change the IP address and gateway of the video encoder
In step 5, you already know the IP address and default gateway of the MAC.
For example, the IP address of my MAC is 192.168.0.112, and the gateway is 192.168.0.1.
Therefore, I can change the IP address of the video encoder to 192.168.0.168(in order to
avoid IP conflicts, please don’t make the IP address of video encoder the same as the IP
address of your MAC), and change the default gateway to 192.168.0.1.
Since each MAC has a different IP address, I can only use my MAC IP as an example.
Before changing the IP address and gateway of video encoder, please refer to the IP
address and gateway of your MAC(In Step 5). If you have any question, please contact us.
We will arrange an engineer to help you set up.
