２５
2). If you purchased an encoder with 4G function, when you only use WIFI mode or
Ethernet port mode instead of 4G mode, please select ‘‘disable’’ in 4G setting. Otherwise,
unable to start live streaming.
3). Please contact us for assistance. Our engineer will help you solve the problem.
7. Port Mapping
Many clients want to watch the output video stream on a wide area network(WAN). In this
case, you will need to perform ‘‘port mapping’’ or ‘‘DDNS’’. This is network part, not video
encoder part, you need to configure the settings in the router control panel.
This is an example of ‘‘port mapping’’ I configured in the TP-LINK router. By the way, the
internal port of the video encoder is 80.
You need to have an IP address on the public network to perform "port mapping" or
