5
Usually, the language of the control panel is English. If Chinese is displayed, you can
change the language in the upper right corner of control panel. Please select ‘‘
英文
’’.
Now the video encoder can be used in local area network(LAN). In order to use it in a wide
area network(WAN), we need to change the IP address of video encoder.
Step 10.
Change the IP address and gateway of video encoder
In step 4, you already know the IP address and default gateway of the PC(or laptop).
For example, the IP address of my PC(or laptop) is 192.168.0.111, and the gateway is
192.168.0.1. Therefore, I can change the IP address of the video encoder to
192.168.0.168(in order to avoid IP conflicts, please don’t make the IP address of video
encoder the same as the IP address of your PC), and change the default gateway to
192.168.0.1.
Since each PC(or laptop) has a different IP address, I can only use my computer IP as an
example. Before changing the IP address and gateway of video encoder, please refer to
the IP address and gateway of your computer(In Step 4). If you have any question, please
contact us. We will arrange an engineer to help you set up.