5
PRODUCT START-UP
Assembly
Carefully remove the product from the box.
To unfold the electric scooter, start by pressing the folding handle with one hand while gently
pulling the handlebars with the other. Straighten the handlebars until you feel the mechanism
engage.
To lock the position, insert the silver clip on the handlebar post. Orient the bars in the correct riding
direction. Attach the handlebars to the post by tightening the bolts with the supplied Allen wrench.
Attach the hand brakes using the supplied Allen wrench. First loosen the bolts to adjust to a
comfortable position, then tighten the bolts.
a) Assemblage du siège
Insert the supplied fuse into the fuse holder by opening the plate on the main tray (See picture 1)
and then close the plate.
Attach the seat post to the main chainring, then use the lock on the bar to set the desired size.
Once the size is set, tighten the lock securely.