1
1
2
2
Lightly cover seeds with coir
3
3
4
First, gently rough up the moist coir with your finger or a fork
Add your seeds evenly to each pod as instructed by the seed packs
STEP 3: FILLING THE RESERVOIR
STEP 3: FILLING THE RESERVOIR
STEP 4: PLANT YOUR SEEDS
STEP 4: PLANT YOUR SEEDS
It is important to read these instructions carefully! Do not fill the tower
directly with water. The water bottle must be used to fill the UrbiPod.
Remove the water bottle from the tower
Unscrew the bottle cap
Fill the bottle with cold water. Add
5ml (a capful) of Urbotanica plant
nutrient to the bottle
Refit bottlecap. Turn bottle upside
down and (cap first) place the
bottle back into the water tower.
You should start to hear the flow
of water from the bottle to the
base reservoir
Repeat! 2 bottles of water and nutrient are
required to fill the UrbiPod. When the bottle
is empty, you will see it visibly pop up from the tower.
This means it’s time to fill the bottle with water and
5ml of nutrient. Once your plants are mature, you can
increase this to 10ml nutrient. A full water bottle will last
approximately 1-2 weeks before needing to be refilled.
5ml nutrient
fill with water
1
2
3