URC MX-1200, Owner'S Manual

MX-1200 C

OLOR

T

OUCH

S

CREEN

Connecting the Battery Pack

Unlock the rear cover by pressing down on the spring lock at the
top of the cover. Remove the cover. For shipment from the factory,
the battery is left out of the MX-1200. Place the battery into the
battery compartment, making sure you align the contacts on the
battery to the contacts on the MX-1200. The battery will snap into
place when aligned properly. Replace the cover and snap it into
place.

Using the Charging Base

Plug the 5V adapter into a
power outlet and into the back
of the charging base. Gently
place the MX-1200 into the
cradle of the charging base. It
automatically aligns itself to
the contacts on the charging
base. The Status light should
immediately light. Red
indicates that it is charging.
Blue shows that it is fully
charged. There is no harm in
leaving the MX-1200 on its
charging base whenever it is not in use.

Page 3

Red indicates charging, Blue that the remote is fully
charged.

Oh Sung to place photo of
MX-1200 in charger with
both blue and red LEDs
indicated.