URC TRC-780, Owner'S Manual

TRC-780 OWNERS MANUAL

Page 6

Date/Time

The Date and Time is automatically sent from the
MRX-10 to the TRC-780. If you would like to
adjust the time or date you can do so on the
remote control. Note: Any Date or Time adjust-
ment made on the TRC-780 will automatically go
out to all the other remotes and keypads in the
system.

1. Change Date: Tap the button beside day,
month, or year then use the numeric keypad
to enter in the new date information. When
you are finished press the Save button.

2. Change Time: Tap the button beside hour or
minutes then use the numeric keypad to enter
in a new time. Set the AM/PM by toggling the
button. When you are finished press the Save
button.

3. Display Date/Time: The TRC-780 can display
either the Time or the Date, but not both.
Select which one you would like to display.
Press the screen button next to Time or Date.
Once you are finished press the Save button.

Erasing and Resetting

WARNING! Only use this button when instructed by Technical
Support.  It resets the memory of the TRC-780 to
the factory condition.  All your programming
will be lost!

To erase your TRC-780 program, press the
“Erase” button to perform a factory default.
Once selected a secondary screen will ask if
you really want to erase the program...