3
Device Layout and Connections:
1.
USB Port:
Provides features and support for advanced applications.
2.
Ethernet Port:
Connects the gateway physically to the local network via an
ethernet cable.
3.
12V Power Receptacle:
Connects to the included power adapter.
4.
Sync Button:
Used to start the selection mode between available radios. Begin
the selection process by pressing the Sync button. The Sync button is used as a
confirmation button when cycling between the wireless radios.
5.
Select Button:
Toggles through the four (4) available radios on the gateway
(Z-Wave, ZigBee, Bluetooth, and Wi-Fi). Once pressed, it displays which radio is
being used by blinking the corresponding LED light.
●
Wi-Fi Radio:
After pressing the Sync button, press the Select button
once
.
The Wi-Fi LED starts to blink, indicating that the WPS feature can be
selected. Press the Sync button again to start the two(2) minutes WPS
countdown.
●
Include/Exclude Radio:
When the select button is pressed a
second
time, the Z-Wave LED starts to blink. This indicates that the Z-Wave
Include/Exclude option can be selected. To
include
(pair) devices, press the
Sync
button
once fast
. to
Exclude
(remove) devices,
press-n-hold
the
Sync
button for
three
(3)
seconds
. Include/Exclude times out after five
(5) minutes.
●
ZigBee Radio:
When the select button is pressed a
third
time, the ZigBee
light blinks indicating that the ZigBee pair option can be selected. To
exit
the selection mode,
press the Select button for three
(3)
seconds
.
1
2
3
5
4
Summary of Contents for TRF-ZW3
Page 1: ......