IV.
Function Introduction
13
5.
Information
5.1 USB Info.
This function will show Flash media's basic information such as media type, content
size, and total capacity.
Device Format
Port Number
File content size
USB total capacity
Note
Executing this function will not delete the content or format of flash media.
5.2 System Information
This function will show information of the duplicator system, including model number
and software version.
System firmware
USB duplicator model
6.
Utility
6.1 Do Format
6.1.1 Auto Format
This function is to do flash FAT formatting. Plug the Flash media in the slot and press
, the system will automatically detect its capacity and formate the media according
to it.
●
If Flash media format is already FAT16 or FAT32, the format function won't change
its original format.
●
If Flash media format is not FAT format, i.e. NTFS, Linux or FAT multi-partition.
The system will execute format according to flash's capacity. When it is capacity
is above 2GB, the system will format the Flash to FAT32, if its capacity is below
2GB, the system will format the media to be FAT16.
During format process, you can use
to check each Flash Card's formatting
status, progress and information.
