background image

• This product is home fitness equipment. Do not modify it for other purposes or outdoor use. 

  The walking machine should be placed on clean and flat ground rather than thick carpet or near 

  water with a 3 -6 ft safe area free from any obstacles behind it.

• This product is intended for adults. Minors should be accompanied by adults when using it. 

  Persons who are indisposed, mentally disabled or lack common sense are not allowed to use 

  it. They can use it under the supervision and guidance of persons responsible for their safety.

• Damaged power cord must be replaced by the manufacturer or professional maintenance 

  personnel to avoid danger.

• This product only works under 100V-120VAC voltage. Be sure to use a power socket with safety 

  ground. The grounding plug must be installed and grounded according to the parameters 

  specified locally. If the plug does not match the socket, ask qualified electricians or after-sales 

  staff to handle it.

• Check all parts before use to ensure the screws and nuts are tightened.

• Wear tight fitting clothes to prevent clothes from being caught by the machine when using it. 

  Keep children or pets away from the machine to avoid accidents.

• Avoid touching any moving parts with hands. Do not place your hands and feet in the space 

  under the running belt.

• This product is suitable for home use rather than professional training and testing, nor medical 

  purposes.

• The indication of heart rates on the product does not serve as data for clinical medicine.

 

• Only one person can use this product when it is in operation.

• Power off and unplug before cleaning and maintenance.

• Power off and unplug when you leave.

• Please use the original accessories. Do not make any replacements without permission.

• The maximum weight capacity for this product is 265 lbs / 120 kg.

  DO NOT EXCEED MAXIMUM WEIGHT CAPACITY.

• Please make sure to add 10ml of lubricant to the lubrication port when using the 

  product for the first time. Add lubricating oil every 3 months or after 100 miles of 

  working.

Please carefully read this manual before use to ensure your safety and avoid accidents.

IMPORTANT SAFETY GUIDELINES

03

Summary of Contents for STROL LITE UR9TM0011





















Reviews: