SPEC.
Classi.
Item
SPECIFCATIONS
Power Unit
Rated input voltage
85V AC ~ 265V AC (Universal voltage)
Output Voltage
85V AC ~ 265V AC (Universal voltage)
Driving Type
Electronic Type
Max. Output
4 kw
Load
No. of circuit
1 circuit
Max. Capacity
18A (Resistive Load)
Degree of
Precision
Degree of Temp Precision
±
1
℃
; Change of 1
℃
/30sec (Delay Option 20 sec)
Motion
Power input display
FND Temp Display
Output Display
RUN RED is ON (Red)
Temp Range
Possible to choose within the range of -9
℃
~ 80
℃
Output Delay(Option)
01 sec ~ 60 sec
Sensor
Types
NTC: Negative Temperature Coefficient Epoxy Molding
Degree of Precision %
1 %
25
℃
’s rating resistance
5000 ohm, Beta Constant = 4000
0
K
Quantity
SENSOR 1: for sensing Temp, SENSOR 2: for checking Overheating (Option)
Function
(Capacity)
Safety
Device
Snapping / Short circuit
of Sensor Wires
If Temp Sensing Sensor is snapped, converted to Timer mode automatically and work
If short Circuit, “ES” displays and output is OFF
Overheating Prevention
Sensor(OPTION)
If overheating sensing temp is higher than that of set overheating temp, “Ht (Overheat)” displays and output is shut
off.
Fuse Resistance
10 ohm (for controller internal circuit protection)
Others
External Case
Flame Retarding
Weight
270 g
Dimensions (mm)
70(W)
×
120(H)
×
27(D)
Use Temp
Air Temp
0
℃
~ 40
℃
Air Humidity
Under 80 %
