100Mbps Coaxial-LAN EOC Converter
◆
Analog monitoring surveillance and HD network upgrading
without replacing the coaxial cable
◆
Long distance network extended and can be up to 300 meters
◆
Support multi-point access, one point to multi-point access
◆
Plug and play, no need to set
◆
Transmission via coaxial cable, twisted pair, telephone line and other
transmission media
Description
Through standard coaxial cable, can provide up to 92 Mbps network flow with
regular video cable.
Built-in transmitting and receiving circuit and each converter is capable of
transmitting and receiving data. It’s simple to use, no hardware or software
debugging, no IP setting, just connecting the video cable to work normally.
Has the advantage of long distance transmission, high-speed communication,
supporting multimedia services and flexing networking. It’s widely applied for
upgrading the original analog system to IP system, building new long-distance
transmission systems. All the original wires in the analog camera can be used
as the transmission medium, no need re-wiring, the performances and
distances depend on the quality of the cable.
Thus, just replacing the front camera, plus EOC transmitter device
(1093/835[slave] or 3000/500), and EOC receiver device (1093/835[master] or
1093/836), you can upgrade the analog systems to IP network, save wiring
time, manpower and material resources.
On 1093/835 you can change the mode (transmitter/receiver) through the
dipswitch on the device receiver (master) and transmitter (slave). Every time you
change the mode you have to power off the device.
ENGLISH
