20
DS1717-008
1.1 HOW TO ENABLE MODO USE WITH HOME AUTOMATION
BUS (IPERBUS)
Select
to open the menu for enabling and disabling the IPerBus home automation bus. The following
page will appear when the bus is enabled by selecting the
ON
icon. The devices connected to the
IPerBus bus can be controlled (scenario activation) and alarms and energy consumptions from the
devices connected to the bus can be displayed in way.
BUS
OFF
ON
Select
to assign names to the scenarios.
Select
to set which alarms detected by IPerBus and shown on MODO must also be sent to the
concierge switchboard (see the dedicated paragraph).
Icons
will not be shown if the bus is set to OFF.
A supplementary ringer connected to the S+/S- terminals cannot be used if the bus is set to ON.
6U[OLV[OLYOHUK[OLÅVVYJHSSM\UJ[PVU^OPJO\ZLZVULVM[OL[LYTPUHSZ*7*7^PSSZ[PSSIL
available (see system diagrams).
1.2 HOW TO ASSIGN NAMES TO SCENARIOS
Select
[VVWLU[OLTLU\MVYHZZPNUPUNUHTLZ[VZJLUHYPVZ;OLºZJLUHYPVUHTLZ»ÄLSKZHYLLTW[`I`
default. The
JVYYLZWVUKPUN07LY:L[ZJLUHYPVJHUUV[ILHJ[P]H[LKPM[OLºZJLUHYPVUHTL»ÄLSKPZLTW[`;OL
name assigned to a scenario in MODO is independent from the one assigned in IPerSet. However, we
suggest to use the same name on MODO and on IPerSet for the sake of clarity.
Example:
;OLÄYZ[ZJLUHYPVVM[OLSPZ[JHSSLK
SCENARIO 1
^PSSHJ[P]H[L[OLÄYZ[ZJLUHYPVJVUÄN\YLKVU07LY:L[
(called
Scenario 1
by default).
If instead you want to call it
RELAX
P[PZHK]PZHISL[VJOHUNL[OLUHTLVM[OLÄYZ[ZJLUHYPVVU07LY:L[
from
Scenario 1
to
RELAX
.
In all cases, the position of a scenario in the MODO list allows to easily identify correspondence with
the IPerSet scenarios.
Unnamed scenarios have no effect in IPerBus.
Touch
to scroll the scenario name list.
•
•
•
•
