20
DS1375-020E
You can also set a trigger time that varies according to the telephone model.
10.17 SELECTION OF LINE TRUNK FOR OUTBOUND CALLS
In iPerTAlk system, telephone lines are organised in trunks (usually each line device or VoIP provider represents a
trunk) which can be selected by the user when dialling a number, in case he/she doesn’t want to use the default
trunk.
A code #X, with X ranging from 0 to 9, is associated to every line trunk in the system. By dialling this code just
before the called number, it is possible to use a specific line trunk.
The programming of these codes and the associated line bundle is a configuration programmed in system by the
administrator / installer user.
10.18 DISPLAY OF SPECIFIC OUTBOUND CALLING NUMBER
If iPerTAlk manages several lines with different associated numbers, through line gateways or VoIP operators, it
allows configuring the numbers that are displayed for outbound calls.
Editing the caller’s number in case of a VoIP provider usually causes a malfunction of the line since the
provider identifies the user based on the number that is displayed.
10.19 OUTBOUND CALL RESTRICTION
iPerTAlk allows you to filter the destinations of calls generated for each individual extension.
Therefore, certain extensions can be blocked for:
— any outbound call;
— international calls;
— calls to special area codes (according to customised rules, e.g.: those that start with 3, if you want to block all
the calls to mobile numbers).
The configuration of call restrictions is a programming available only to Administrator users.
10.20 COMPRESSED AND WIDEBAND CODEC MANAGEMENT
iPerTAlk allows configuring, on a single extension and single line trunk level, audio/video codecs available for the
extension, for inbound and outbound calls.
11 SYSTEM FUNCTIONS
11.1 ALARM/APPOINTMENTS
iPerTAlk features the Alarm/Appointments function, namely the possibility to generate an automatic call, with
customised message, that can be activated for a specific date/time and that can be repeated if necessary.
The destination of the call can be an extension or a public network number (in this case, the destination number
is to be entered including any area code for engaging the line).
This function can be set through the menu Multimedia
→
Appointments.
Summary of Contents for iPerTAlk 1375
Page 98: ...98 DS1375 020E...
Page 99: ...99 DS1375 020E...
