61
DS1375-020E
You can also manually change the quality of the video considering the available internet bandwidth. This
configuration is possible by accessing the menu System
→
Advanced Configurations
→
System Definition
→
System, changing the value of the “Video Quality for call forwarding” parameter.
It is suggested to consider the following reference table:
Level
Upload bandwidth available
Low
< 300Kbps
Medium < 1 Mbps
High
> 1Mbps
11.21 INTEGRATION WITH IPERCOM 2.0 SYSTEM
iPerTalk allows integrating the PBX with the IperCom 2.0 system or later. Such integration is useful to make
Audio-Video calls, with relevant access point opening, from any device of the IperCom range to devices of the
iPerTAlk range.
It is not possible to make calls from iPerTAlk devices to IperCom devices.
In order to enable this function it is necessary to make some configurations to the IperTalk PBX to be able to
manage calls from the IperCom system in use, see the following paragraph “
IperCom Lines
”.
Information about the specific configurations of the IperCom system integrated with the iPerTAlk system can be
found in the IperCom system technical manual.
11.21.1 IPERCOM LINES
To set IperCom lines, select the following menu items: System
→
Advanced Configurations
→
Lines, press the
key
.
The page to set the lines is accessed and includes a drop-down menu from which it is possible to select the type
of line to be set, in this case
IperCom
.
Indicate the following parameters:
—
Trunk name:
displayed name that allows identifying the lines being created.
—
Channels Number:
you can increase the number of available channels to increase the number of simultaneous
calls. The maximum number of simultaneous calls is equal to the number of licences for
SIP Junction Channel
Ref. 1375/20x
available on the system.
1375/20x licenses are cumulative.
—
Notes:
optional field to add a description.
In the section “Advanced configurations” it is possible to set any (non-mandatory) rules to edit caller and/or
called numbers.
—
Manipulation on Calling Number:
it allows editing the caller number only for incoming calls.
—
Manipulation on Called Number:
it allows editing the called number only for incoming calls.
Summary of Contents for iPerTAlk 1375
Page 98: ...98 DS1375 020E...
Page 99: ...99 DS1375 020E...
