73
DS1375-020E
The voice messages of all (user and system) voice mails are saved to the system memory support. iPerTalk
autonomously deletes the messages older than 90 days, in order not to fill the memory.
These applications are already installed by default in the iPerTAlk system. However, if they are not present, it is
possible to install them again.
WARNING:
removing the applications will remove also any customised music and, in case of vmail, all the
recordings made.
To install these applications, proceed from the menu System
→
Applications, then press the key
New App.
VMAIL Installation
—
Name:
define the name of the application (for example
voicemail
); only lowercase names and with no spaces
are allowed.
—
Extension:
specify the extension of the Application (e.g. 710); this extension will be used as “head of the
group” of all the extensions for simultaneous calls (or simultaneous channels) according to what defined in the
Contemporary field.
—
Contemporary:
specify the number of simultaneous calls that the Application can manage; each of this
simultaneous calls will be associated to a system extension immediately after the extension defined above
as “head of the group” (e.g., if the “head of the group” extension is 710, 2 simultaneous calls will engage
extensions 711 and 712).
—
Music on hold custom:
it is possible to specify a waiting music dedicated to the Vmail Application other than
the system waiting music (optional); the selection can be made among the available system waiting musics
that can be integrated with other from the system page.
—
IVR type:
select the
vmail
item.
— Press the key
to start the installation.
Consultation installation
—
Name:
define the name of the application (for example
consultation
); only lowercase names and with no
spaces are allowed.
—
Extension:
specify the extension of the Application (e.g. 715); this extension will be used as “head of the
group” of all the extensions for simultaneous calls (or simultaneous channels) according to what defined in the
Contemporary field.
—
Contemporary:
specify the number of simultaneous calls that the Application can manage; each of this
simultaneous calls will be associated to a system extension immediately after the extension defined above
as “head of the group” (e.g., if the “head of the group” extension is 715, 2 simultaneous calls will engage
extensions 716 and 717).
—
Music on hold custom:
it is possible to specify a waiting music dedicated to the Consultation Application
other than the system waiting music (optional); the selection can be made among the available system waiting
musics that can be integrated with other from the system page.
—
IVR type:
select the Consultation item.
— Press the key
to start the installation.
At the end of the installation, the two applications are active.
To contact the “consultation” Application that is used to make the iPerTAlk users listen to voice messages, just
dial *84*or press the relevant key, if any, from the extension associated with the user and access with the default
password
0000
.
Summary of Contents for iPerTAlk 1375
Page 98: ...98 DS1375 020E...
Page 99: ...99 DS1375 020E...
