29
DS1375-020E
11.6.4 FORWARDING CALL/VIDEO CALL FROM PHONE/VIDEOPHONE TO EXTERNAL IP VIDEO STATION
To make a call or video call from a telephone (IP or BCA) or videophone to the external IP video station, simply dial
the number of the extension paired with the external IP video station (e.g. 203), specifying through the relevant
button whether you wish to make a call or a video call, if using a videophone.
11.6.5 MANAGEMENT OF VIDEO CALL TO 1375/815 TELEPHONES
To be able to manage the video call with 1375/815 videophones it is necessary to configure some video
parameters.
Directly from the Videophone:
— Press on the “
Applications
” icon
— Press on “
Telephone settings
”
— Select the “
Video
” section
— Access the “
Other settings
” section and remove the tick from (leaving the other options unchanged):
• Hardware Endec Acceleration
• Hardware Decodec Acceleration
• Colour improvement
To make the changes effective, select the Save button at the top right.
This configuration is required ONLY on 1375/815 devices that will receive or forward video calls.
11.6.6 CONVERSATION TIMEOUT SETTING
It is possible to set a timeout to stop conversations relevant to calls made from/to a external IP video station.
Access the section System
→
Advanced Configuration
→
System Definition and press on
System
.
Edit the “
Doorphone conversation timeout (seconds)
” by setting the number of seconds relevant to the
maximum duration of the conversation.
Values higher than 15s are valid.
When the set timeout elapses, the conversation will automatically be interrupted by iPerTAlk.
11.6.7 DOOR OPENING COMMAND SENDING
It is possible to send the door opening commands to the external IP video station. The commands can be sent
during a conversation or in standby, without being engaged in a conversation. The methods of use are described
below.
11.6.7.1 SENDING OF DOOR OPENING COMMAND DURING A CONVERSATION
During a conversation (audio or video), regardless of how it has been initialised, it is always possible to send
the opening commands (dry contact or electric lock) from a telephone (IP or BCA) or videophone, as described
below.
Use th
e telephone keys, during a conversation (audio or video), to dial:
1 o *
→
to activate the electric lock;
2 o #
→
to activate the dry contact.
Summary of Contents for iPerTAlk 1375
Page 98: ...98 DS1375 020E...
Page 99: ...99 DS1375 020E...
