33
DS1375-020E
11.7.2.1 CALL MODULE ADVANCED CONFIGURATIONS
iPerTalk allows carrying out some advanced configurations of the call module.
Access the
Extensions
section (System
→
Advanced Configuration).
Select the Mac-address relevant to the call module to be configured.
Once the device is selected, the configuration page will open showing the following parameters:
In the “
Name
” field it is possible to assign a significant name to the device (e.g. NORTH entry module).
In the “
Notes
” field it is possible to enter any notes on the device.
It is possible to carry out some advanced configurations of the call module 1375/823 and 1375/824.
Press on “Advanced configurations” to open the section and enter the desired configuration values.
Below is the description of the following parameters:
—
Door Time (s):
delay in seconds (range from 1 to 90 seconds) for the execution of the opening command of
the electric lock (default 1s).
—
Gate Time (s):
delay in seconds (range from 1 to 90 seconds) for the execution of the opening command of
the dry contact (default 1s).
—
Speaker volume:
change the level (min: 1 to max: 6) of the volume of the speaker of the unit (default 4).
After changing the parameters it is necessary to restart the call module (with the restart button on the
iPerTAlk interface).
Summary of Contents for iPerTAlk 1375
Page 98: ...98 DS1375 020E...
Page 99: ...99 DS1375 020E...
