34
DS1375-020E
11.7.2.2 PHONEBOOK CONFIGURATION (ADMINISTRATOR USER ONLY)
IPerTAlk allows making calls from call modules only to extensions (up to a maximum of 6 destinations) that have
been previously entered in the phonebook. It is in fact not possible to make direct calls by dialling the extension
number.
To set the contacts to display and, consequently, to call, it is necessary to configure the phonebook of the call
module with iPerTAlk, through an administrator user.
From the “
Phone Functions
” menu, select the “
Phonebook
” item.
The contacts that can be associated to a call module Ref. 1375/823 and 1375/824 are those with “Public” or
“Video door phone” visibility. At the bottom of the contact creation or modification page, there is the “Video Door
phone” section where it is possible to select the MAC address of the desired call module and, in case of “Public”
visibility, also the relative destination; in case of “Video Door phone” visibility the destination will be the contact
number.
Press on the key
to make the configuration immediately operative without having to restart iPerTAlk
or the devices.
11.7.2.3 CONFIGURATION OF SWITCHBOARD CALL (MAIN TELEPHONE)
To configure the switchboard call on modules Ref. 1375/823 and 1375/824 access the System section and press
on
Speed Dial
.
Press on the key
and enter the following parameters:
— In the “
Called
” field, enter the “switchboardc” parameter.
— In the “
New Target
” field, enter the extension number of the device to be used as switchboard.
Press the key
to make the configuration operative.
On all the call modules present on the system, press the key
to be able to make a call to the switchboard.
11.7.3 MAKING A CALL/VIDEO CALL FROM CALL MODULE TO TELEPHONE/VIDEOPHONE OR VIDEO
DOOR PHONE 1375/825
To make a call or a video call from call module 1375/823 or 1375/824 just search for the contact to call in the
directory. Pressing the key
will automatically start the call or video call to the device associated with the
destination telephone number.
The destination telephone/videophone or video door phone will receive a standard call coming from the extension
paired with the external station.
Direct calls by dialling numbers on the call module keypad are disabled, since they could reach any number
reachable by the system.
For more details, see the
User’s manual
supplied with the call module.
11.7.4 MAKING A CALL/VIDEO CALL FROM TELEPHONE/VIDEOPHONE TO CALL MODULE
To make a call or video call from a telephone (PC or BCA) or videophone to the call module just dial the extension
number associated with the external station (e.g. 203). The system will automatically make a call or a video call
depending on the type of device.
Summary of Contents for iPerTAlk 1375
Page 98: ...98 DS1375 020E...
Page 99: ...99 DS1375 020E...
