65
DS1375-020E
12. SYSTEM CONFIGURATION
12.1 INBOUND ROUTING
This section of the system’s configuration controls how incoming calls are managed.
Three default profiles are available:
day
,
night
and
other
.
Through the licence for Routing Profile Ref. 1375/9 it is possible to activate a further profile for the management
of the inbound call routing (in addition to the 3 provided by default by the system), for particular time intervals (for
example: holidays, bank holidays, etc.).
By pressing the key
it is possible to enter a profile validity interval, i.e. in which time interval on a daily basis
(0-24h), the profile in question will be active.
The page is divided into two parts: the left side (
From
field) indicates the hour and minutes at which the profile
validity starts, the right side (
To
field) indicates the hour and minutes at which validity ends.
Enter a time interval (in this example from 9 a.m. to 12 a.m.) and confirm. In this way, the day profile will be active
in this time slot and the system will apply the routing rules contained in this profile (in this case, outside the
specified time slot, the default profile will be activated).
At this point you can enter the routing rules, then clicking on the name of the profile you can view the summary
table of rules already configured:
Each rule defines a filter based on: the source line (trunk), the day, the time interval (from - to), the calling number
and/or the called number (the “
*
“ character means that the filter on the calling and called number is disabled) and
then, if the rule is complied with, the call is forwarded to the indicated destination. Then, the calling and called
numbers are displayed and, based on all these variables, the final destination is chosen.
Summary of Contents for iPerTAlk 1375
Page 98: ...98 DS1375 020E...
Page 99: ...99 DS1375 020E...
