78
DS1375-020E
12.8 FIAS PROTOCOL INTEGRATION MODULE
To enable the service, the licence for
Hotel Services FIAS Protocol Ref. 1375/7
is required.
iPerTAlk supports the
FIAS
protocol Micros-Fidelio FIAS (Fidelio Interface Application Specification protocol).
The protocol is commonly used for PMS applications in the Hotel and Hospitality sector and therefore makes it
possible to interface iPerTAlk with the Hotel management system to exchange information such as:
— room’s telephone traffic
— check-in and check-out of guests
— activation/deactivation of room’s telephone service
— room’s state of cleanliness
Service configuration requires the following parameters:
—
Address:
IP address of the PMS system, which must be reachable from the iPerTAlk system
—
Port:
network port for the PMS server.
To activate the service simply activate the service status.
12.9 ADVANCED CONFIGURATIONS
The advanced configuration section allows configuring:
—
Extensions:
all the appliances and extensions that can be configured in the system (telephones, faxes,
cameras, external stations, etc.).
—
Lines:
all the lines for the connection with line gateways and VoIP operators.
—
System Setting:
for general system configuration (general parameters of the telephone part, network
configuration, date and time confi guration, consultation and license loading).
—
Line trunks:
it is possible to rearrange the line trunks, e.g. by joining the lines of two devices Ref. 1375/864,
or to rearrange the line trunk mapping, e.g. to change the default line trunk
.
—
System Maintenance:
telephone application restart, complete system reboot and reset to factory configurations.
In addition, an automatic restart can be configured for devices Ref. 1375/821, 1375/822, 1375/823, 1375/824,
1375/825.
WARNING:
to avoid malfunctions, it is recommended to check the system activity before rebooting. System
activity is shown by its indicators on the main screen of the MyTalk interface.
Summary of Contents for iPerTAlk 1375
Page 98: ...98 DS1375 020E...
Page 99: ...99 DS1375 020E...
