1
2
3
4
5
6
17
E N G L I S H •
User’s manual
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and diferential switch
when you are using an electric equipment.
SERVICE
Tool service must be perfomed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
AIR COMPRESSOR
DANGER !
INTAKE AIR. Can contain carbon monoxide or
other contaminants. Will cause serious injury
or death. URREA air compressors are not de-
signed, intended or approved for breathing air.
Compressed air should not be used for breath-
ing air applications unless treated in accor-
dance with all applicable codes and regula-
tions.
WARNING: HAZARDOUS VOLTAGE. Can
cause serious injury or death. Disconnect power
and bleed pressure from the tank before ser-
vicing. Lockout/Tagout machine. Compressor
must be connected to properly grounded cir-
cuit. Do not operate compressor in wet condi-
tions. Store indoors.
MOVING PARTS. Can cause serious injury. Do
not operate with guards removed. Machine
may start automatically. Disconnect power be-
fore servicing. Lockout/Tagout machine.
HOT SURFACES. Can cause serious injury. Do
not touch. Allow to cool before servicing. Do
not touch hot compressor or tubing.
HIGH PRESSURE AIR. Bypassing, modifying or
removing safety/relief valves can cause seri-
ous injury or death. Do not bypass, modify or
remove safety/relief valves. Do not direct air
stream at body. Rusted tanks can cause explo-
sion and severe injury or death. Drain tank
daily or after each use. Drain valve located at
bottom of tank.
CAUTION: RISK OF BURSTING. Use only
suitable air handling parts acceptable for pres-
sure of not less than the maximum allowable
working pressure of the machine.
FEATURES
KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
1. ENGINE.
2. HEAD.
3. 500 L TANK.
4. ON/OFF SWITCH.
5. BALL VALVE.
6. PROTECTIVE
GUARD.
COMP95XX manual.indd 17
23/06/15 14:27
